Copper products are used in power, process and fluid-handling industries because of their superior conductivity and insensitivity to material changes. These are manufactured using refined copper, which can allow easy flow of electricity as well as effective heat transfer and can therefore be used as bus bars, tubes, rods, conductors and technical fittings. The ductility of the material enables accurate forming and easy machining, and enables consistency in integrating into complex systems.
Copper is also intrinsically resistant to corrosion and bacterial growth, very helpful in water and contact-sensitive applications. Copper does not suffer structural degradation even when subjected to constant load and changes in temperature. Having minimal maintenance needs and optimistic recyclability worth, copper products present a viable mix of efficiency, length of service and sustainability in industrial applications in the contemporary era.
We are the leading Copper Products Manufacturers in India, and are very diverse in the industries in which electrical conductivity, thermal efficiency, corrosion resistance and formability are not negotiable. We, Ganga R Ispat Metals, are the manufacturers and distributors of the complete gamut of Copper Products that have the potential to respond to the needs of modern industrial, electrical and engineering applications.
Copper is a non-ferrous metal that is highly used, but its utility is much more than the simple conductivity. When properly handled, copper provides an exceptionally rare blend of mechanical workability, long-term strength and durability and thermal and electrical stability. To produce our copper products, we are employing well-regulated metallurgical techniques to maintain uniform chemical makeup, smooth-grained crystal arrangement and dependable performance in all kinds of applications.
Our products (copper products) are guaranteed to be in accordance with ASTM, IS and other international standards; therefore, each copper product produced in our premises is both functional and dimensional to the expectations.
Although numerous advanced alloys are available in the modern world, copper is still the specified one due to its perfect compromise of both physical and functional characteristics. The little-known benefit of copper is that it has a self-healing oxide coating, which shields the surface against additional corrosion without affecting the conductivity. This renders copper particularly useful in exposed or moist environments.
Copper also exhibits:
Due to these properties, copper products are not only raw materials, but they are also performance-sensitive elements in systems where efficiency and safety are valued.
Ganga R Ispat Metals, being experienced Copper Products Suppliers in India, will be providing copper in different processed forms to meet various manufacturing and engineering requirements. This is our main page that has our entire copper portfolio, and each product form also has an individual product page that can be used to support specifications.
Our products are of a vast range, which comprises:
Such forms are made in standard sizes and in sizes according to customer drawings or usage needs.
To achieve the required accuracy of machining and fabrication, we also provide:
Every product is produced so as to provide a smooth surface finish, a homogeneous structure, as well as uniform machinability.
We have many applications of our Copper Bars in electrical panels, earthing systems, power distribution units and other general engineering applications. These bars are offered in round, square, hexagonal and flat profiles, providing the manufacturer with an optimal usage of materials without compromising performance.
Huge applications of copper plates and sheets include heat exchangers, electrical busbars, transformer parts, roof covering and industrial linings. The uniformity in thickness, controllable hardness and clean edges are essential in these applications, and we have it all in our production process.
Copper pipes and tubes, on the other hand, are appreciated due to their thermal conductivity and resistance to corrosion and are hence suitable in HVAC systems, refrigeration units and fluid transportation lines.
Being a reputable Copper Products Dealers in India, Ganga R Ispat Metals is not only concerned with the provision of copper, but also with assisting customers to make the correct grade and form choices as per the conditions under which they will operate. Little known to many users is the fact that various grades of copper have varying behaviour under thermal load, electrical load, or mechanical forming.
The technical guidance assists the customers in realising:
This will eliminate failure of materials, and enhance the efficiency of the system as well as better payback.
We are reliable Copper Products Wholesalers in India, and we serve high volume and repeat orders of OEMs, contractors and infrastructure projects. Supply of copper in bulk quantities involves very tight control on the uniformity of batches because a change in conductivity or hardness may impact the overall performance of the final products.
Through our wholesale supply system, we are guaranteed of:
This renders our copper products both in the short-run procurement arrangement and the long-run supply arrangement.
We are trusted Copper Products Exporters in India, Ganga R Ispat Metals exports export-grade copper products to the international market. Export shipments go through rigorous quality inspections and are packed in such a way as to avoid being damaged during long-haul handling and exposure to the environment.
The quality, cost-effectiveness and adherence of Indian manufactured copper products to international standards make them to be accepted globally. Some of the industries we serve through our export supply are power generation, electronics manufacturing, renewable energy and industrial engineering.
Applications of copper products are found in:
Copper is versatile; hence, it can be used effectively in heavy-duty industrial and precision-driven electrical components.
Copper Products at Ganga R Ispat Metals are produced with purity, consistency and real-world performance. Our copper materials are developed to aid systems that require precision, security, and stability; electrical efficiency, structural reliability, etc.
Reach out to our team to speak about your application needs, volume demands, and the type of copper form you want- and get to know what copper looks like, developed by metallurgical knowledge and industrial confidence.
| Grade / UNS | Common Name | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness (HB) | Notes |
|---|---|---|---|---|---|---|
| C10100 | OFE Copper | 210–250 | 70–100 | 35–50 | 40–50 | Ultra-pure, soft and ductile |
| C10200 | OF Copper | 200–240 | 70–90 | 35–50 | 40–50 | Excellent electrical conductivity |
| C11000 | ETP Copper | 210–250 | 70–100 | 30–50 | 40–55 | Standard industrial copper, ductile |
| C12200 | DHP Copper | 240–280 | 120–150 | 20–40 | 50–70 | Deoxidized, higher strength |
| C18150 | Chromium Copper | 400–450 | 250–300 | 15–25 | 90–110 | High strength, welding electrodes |
| C22000 | Commercial Bronze | 250–300 | 100–150 | 20–30 | 60–80 | Decorative & structural use |
| C26000 | Cartridge Brass | 350–400 | 200–250 | 35–40 | 70–90 | Used in fittings & cartridges |
| C36000 | Free Machining Brass | 350–380 | 200–230 | 25–35 | 70–90 | Precision parts |
| C71500 | 70/30 Copper-Nickel | 450–550 | 250–350 | 30–35 | 90–110 | Marine applications |
| C14500 / C14700 | Free Machining Copper | 220–250 | 70–100 | 30–45 | 40–50 | Connectors & fasteners |
| Grade / UNS | Common Name | Density (g/cm³) | Melting Point (°C) | Thermal Conductivity (W/m·K) | Electrical Conductivity (% IACS) | Thermal Expansion (10⁻⁶ /K) | Color / Appearance |
|---|---|---|---|---|---|---|---|
| C10100 | OFE Copper | 8.94 | 1083 | 398–400 | 101–102 | 16.5 | Reddish-orange |
| C10200 | OF Copper | 8.94 | 1083 | 390–398 | 100–101 | 16.5 | Reddish-orange |
| C11000 | ETP Copper | 8.94 | 1083 | 390–395 | 97–100 | 16.5 | Metallic red |
| C12200 | DHP Copper | 8.94 | 1083 | 360–380 | 95–97 | 16.5 | Reddish-orange |
| C18150 | Chromium Copper | 8.80–8.85 | 1080–1090 | 220–250 | 70–80 | 16.5 | Reddish gray |
| C22000 | Commercial Bronze | 8.80–8.85 | 1000–1050 | 60–75 | 28–35 | 17–18 | Yellow-brown |
| C26000 | Cartridge Brass | 8.50–8.55 | 920–950 | 110–120 | 28–30 | 19–20 | Golden yellow |
| C36000 | Free Machining Brass | 8.50–8.55 | 900–940 | 110–120 | 28–30 | 19–20 | Golden yellow |
| C71500 | 70/30 Copper-Nickel | 8.90–8.95 | 1250–1300 | 60–75 | 14–18 | 16–17 | Silvery-copper |
| C14500 / C14700 | Free Machining Copper | 8.94 | 1083 | 390–395 | 98–100 | 16.5 | Reddish-orange |
| Grade / UNS | Common Name | Melting Point (°C) | Thermal Conductivity (W/m·K) | Specific Heat (J/kg·K) | Thermal Expansion (10⁻⁶ /K) | Notes |
|---|---|---|---|---|---|---|
| C10100 | OFE Copper | 1083 | 398–400 | 385 | 16.5 | Excellent heat conduction |
| C10200 | OF Copper | 1083 | 390–398 | 385 | 16.5 | High thermal conductivity |
| C11000 | ETP Copper | 1083 | 390–395 | 385 | 16.5 | Standard industrial copper |
| C12200 | DHP Copper | 1083 | 360–380 | 385 | 16.5 | Corrosion resistant |
| C18150 | Chromium Copper | 1080–1090 | 220–250 | 385 | 16.5 | High strength alloy |
| C22000 | Commercial Bronze | 1000–1050 | 60–75 | 380–390 | 17–18 | Lower conductivity |
| C26000 | Cartridge Brass | 920–950 | 110–120 | 380–390 | 19–20 | Moderate conductivity |
| C36000 | Free Machining Brass | 900–940 | 110–120 | 380–390 | 19–20 | Precision machining |
| C71500 | 70/30 Copper-Nickel | 1250–1300 | 60–75 | 380–390 | 16–17 | Marine-grade alloy |
| C14500 / C14700 | Free Machining Copper | 1083 | 390–395 | 385 | 16.5 | Good heat transfer |
| Grade / UNS Number | Common Name | Type / Description | Special Features / Notes |
|---|---|---|---|
| C10100 | Oxygen-Free Copper (OFE) | Pure Copper, Oxygen-Free | High conductivity, ultra-pure, used in electronics |
| C10200 | Oxygen-Free Copper (OF) | Pure Copper, Oxygen-Free | Excellent electrical/thermal conductivity, low oxygen content |
| C11000 | Electrolytic Tough Pitch (ETP) | Copper, ETP Grade | Standard commercial copper, used in electrical wiring and tubes |
| C12200 | Deoxidized High-Phosphorus (DHP) | Copper, DHP Grade | High corrosion resistance, used in plumbing, heat exchangers |
| C18150 | Chromium Copper | Copper Alloy | High strength, good corrosion resistance, used in welding electrodes |
| C22000 | Commercial Bronze | Copper-Tin Alloy | Moderate strength, corrosion resistant, decorative applications |
| C26000 | Cartridge Brass | Copper-Zinc Alloy | Excellent machinability, used in cartridges, fittings |
| C36000 | Free-Machining Brass | Copper-Zinc Alloy | Superior machinability, used for precision components |
| C71500 | 70/30 Copper-Nickel | Copper-Nickel Alloy | Excellent corrosion resistance, used in marine and chemical applications |
| C10100 – C13000 | Pure Copper | Copper (General) | High conductivity, ductile, widely used in electrical and industrial applications |
| C10100 – C10200 | Oxygen-Free Copper | Copper (OF/OFE) | Ultra-pure copper, electrical and high-vacuum applications |
| C11000 | Electrolytic Copper | Copper (ETP) | Standard industrial copper, electrical & heat transfer applications |
| C14500 / C14700 | Free Machining Copper | Copper Alloy | High machinability, used in components requiring precision machining |
| Grade / UNS | Common Name | Form | Standard Sizes | Thickness / Diameter Range | Length Range | Notes |
|---|---|---|---|---|---|---|
| C10100 | OFE Copper | Ingot | 50–300 kg blocks | – | – | Standard for high-purity applications |
| C10100 | OFE Copper | Sheet / Plate | 1–2000 mm width | 0.5–50 mm | 1000–6000 mm | Custom widths available |
| C10100 | OFE Copper | Rod / Bar | 5–200 mm diameter | – | 1000–6000 mm | Precision drawing available |
| C10100 | OFE Copper | Tube / Pipe | 10–200 mm OD | 1–20 mm wall thickness | 1000–6000 mm | For vacuum and electrical applications |
| C11000 | ETP Copper | Sheet / Plate | 500–2000 mm width | 1–100 mm | 1000–6000 mm | Rolled sheets |
| C11000 | ETP Copper | Rod / Bar | 6–250 mm diameter | – | 1000–6000 mm | Electrical / industrial use |
| C11000 | ETP Copper | Tube / Pipe | 10–250 mm OD | 1–25 mm wall | 1000–6000 mm | Conductors, heat exchangers |
| C26000 | Cartridge Brass | Sheet / Plate | 500–2000 mm width | 0.5–50 mm | 1000–6000 mm | Excellent machinability |
| C26000 | Cartridge Brass | Rod / Bar | 5–200 mm diameter | – | 1000–6000 mm | Fittings, cartridges |
| C26000 | Cartridge Brass | Tube / Pipe | 10–200 mm OD | 1–20 mm wall | 1000–6000 mm | Industrial & electrical |
| C71500 | 70/30 Copper-Nickel | Sheet / Plate | 500–2000 mm width | 1–50 mm | 1000–6000 mm | Corrosion resistant |
| C71500 | 70/30 Copper-Nickel | Tube / Pipe | 10–200 mm OD | 1–25 mm wall | 1000–6000 mm | Heat exchangers, seawater applications |
| Form | Size / Diameter (mm) | Thickness / Wall (mm) | Length (mm) | Weight (kg) | Notes |
|---|---|---|---|---|---|
| Sheet / Plate | 1000 × 2000 | 1 | 2000 | 17.9 | Standard sheet |
| Sheet / Plate | 1000 × 2000 | 2 | 2000 | 35.8 | Double thickness |
| Sheet / Plate | 1000 × 2000 | 5 | 2000 | 89 | Medium thickness |
| Sheet / Plate | 1000 × 2000 | 10 | 2000 | 178.8 | Thick plate |
| Sheet / Plate | 1000 × 2000 | 20 | 2000 | 357.6 | Extra thick |
| Sheet / Plate | 1000 × 2000 | 50 | 2000 | 894 | Very heavy plate |
| Rod / Bar | 10 | Solid | 1000 | 7 | Small rod |
| Rod / Bar | 20 | Solid | 1000 | 28.2 | Medium rod |
| Rod / Bar | 50 | Solid | 1000 | 176.3 | Large rod |
| Rod / Bar | 100 | Solid | 1000 | 706.8 | Heavy rod |
| Rod / Bar | 150 | Solid | 1000 | 1590.3 | Extra heavy rod |
| Rod / Bar | 200 | Solid | 1000 | 2827.4 | Very heavy rod |
| Tube / Pipe | 20 | 2 | 1000 | 2.6 | Small pipe |
| Tube / Pipe | 50 | 3 | 1000 | 15.1 | Medium pipe |
| Tube / Pipe | 100 | 5 | 1000 | 63 | Large pipe |
| Tube / Pipe | 150 | 10 | 1000 | 198.6 | Heavy pipe |
| Tube / Pipe | 200 | 15 | 1000 | 398.2 | Extra heavy pipe |
| Grade / UNS | Common Name | Cu (%) | Zn (%) | Sn (%) | Pb (%) | Ni (%) | Cr (%) | P (%) | O (%) | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| C10100 | OFE (Oxygen-Free Electrolytic) | 99.99 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.0005 | Ultra-pure, highest conductivity |
| C10200 | OF (Oxygen-Free) | 99.95 | ≤0.03 | ≤0.02 | ≤0.02 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.001 | Excellent conductivity, low oxygen |
| C11000 | ETP Copper | 99.9 | ≤0.04 | ≤0.02 | ≤0.02 | ≤0.01 | ≤0.01 | ≤0.03 | 0.02–0.04 | Standard industrial copper, widely used |
| C12200 | DHP Copper | 99.8 | ≤0.05 | ≤0.02 | ≤0.03 | ≤0.01 | ≤0.01 | 0.015–0.04 | ≤0.03 | High corrosion resistance, deoxidized with phosphorus |
| C18150 | Chromium Copper | 97 | ≤0.5 | ≤0.5 | ≤0.2 | ≤0.3 | 0.6–0.9 | ≤0.02 | ≤0.03 | High strength, corrosion-resistant |
| C22000 | Commercial Bronze | 90–95 | ≤1.0 | 5–10 | ≤0.2 | ≤0.5 | ≤0.05 | ≤0.03 | ≤0.05 | Decorative, bearings, moderate strength |
| C26000 | Cartridge Brass | 70 | 29–30 | ≤0.2 | ≤0.1 | ≤0.5 | ≤0.05 | ≤0.03 | ≤0.05 | Excellent machinability, fittings and cartridges |
| C36000 | Free Machining Brass | 61.5–64 | 35–38 | ≤0.2 | 1–3 | ≤0.5 | ≤0.05 | ≤0.03 | ≤0.05 | Superior machinability, precision components |
| C71500 | 70/30 Copper-Nickel | 70 | ≤1.0 | ≤0.2 | ≤0.1 | 28–30 | ≤0.05 | ≤0.03 | ≤0.05 | Excellent corrosion resistance, marine & chemical use |
| C14500 / C14700 | Free Machining Copper | 99.9 | ≤0.5 | ≤0.2 | 0.5–2.5 | ≤0.5 | ≤0.05 | ≤0.03 | ≤0.05 | High machinability, fasteners, connectors |
| Grade / UNS | Common Name | Casting / Ingot Production | Forming Methods | Heat Treatment / Annealing | Surface Finishing | Notes / Special Instructions |
|---|---|---|---|---|---|---|
| C10100 | OFE Copper | Electrolytic refining → continuous casting or ingots | Hot rolling, forging, extrusion, drawing | Soft annealing at 400–600°C for ductility | Pickling, bright annealing | High purity, avoid contamination |
| C10200 | OF Copper | Electrolytic refining → ingots | Hot and cold rolling, extrusion, drawing | Annealing at 400–600°C to reduce strain | Pickling, polishing | Oxygen-free, maintain clean environment |
| C11000 | ETP Copper | Electrolytic refining → ingots | Hot rolling, extrusion, cold rolling, drawing | Annealing at 350–650°C for stress relief | Pickling, bright annealing | Standard industrial process, versatile |
| C12200 | DHP Copper | Melting → deoxidation with phosphorus → ingots | Hot and cold rolling, drawing, extrusion | Annealing at 350–600°C | Pickling, polishing | Phosphorus prevents oxidation during processing |
| C18150 | Chromium Copper | Melting with alloying → ingots | Hot working limited, cold work possible | Stress relieving recommended | Polishing, degreasing | High-strength alloy, careful heat control |
| C22000 | Commercial Bronze | Melting with tin → ingots | Hot and cold forming, limited forging | Stress relief annealing | Polishing, light grinding | Corrosion-resistant, decorative applications |
| C26000 | Cartridge Brass | Melting with zinc → ingots | Hot and cold rolling, extrusion, drawing | Annealing at 400–600°C | Pickling, polishing | Excellent machinability, widely used in fittings |
| C36000 | Free Machining Brass | Melting with zinc and lead → ingots | Hot and cold forming, machining | Annealing at 350–550°C | Pickling, polishing | Leaded brass, precision machining |
| C71500 | 70/30 Copper-Nickel | Melting with nickel → ingots | Hot and cold forming, extrusion | Stress relief at 600–800°C | Polishing, pickling | Corrosion-resistant, marine applications |
| C14500 / C14700 | Free Machining Copper | Melting → ingots | Hot and cold working, machining | Annealing at 400–600°C | Polishing, degreasing | Leaded free-machining, avoid overheating |
| Grade / UNS | Common Name | Finishing Techniques | Purpose / Notes |
|---|---|---|---|
| C10100 | OFE Copper | Bright Annealing, Pickling, Polishing, Electroplating | Maintains high conductivity, prevents surface oxidation, enhances appearance |
| C10200 | OF Copper | Bright Annealing, Pickling, Polishing, Electroplating | Preserves purity and conductivity, smooth surface for electrical applications |
| C11000 | ETP Copper | Pickling, Polishing, Electroplating, Rolling Finish | Standard industrial finish, protects from surface tarnish, ready for fabrication |
| C12200 | DHP Copper | Pickling, Polishing, Annealing, Rolling Finish | Prevents surface oxidation, improves corrosion resistance |
| C18150 | Chromium Copper | Polishing, Stress-Relief, Electroplating | Enhances corrosion resistance and surface quality |
| C22000 | Commercial Bronze | Polishing, Grinding, Pickling, Patina Finish | Decorative finish, corrosion protection, smooth surface |
| C26000 | Cartridge Brass | Polishing, Pickling, Electroplating, Rolling Finish | Improves appearance, machinability, and corrosion resistance |
| C36000 | Free Machining Brass | Polishing, Pickling, Electroplating | Enhances precision machining, reduces surface defects |
| C71500 | 70/30 Copper-Nickel | Polishing, Pickling, Passivation, Rolling Finish | Marine-grade finish, corrosion-resistant surface |
| C14500 / C14700 | Free Machining Copper | Polishing, Pickling, Electroplating, Rolling Finish | Optimized for precision components and connectors |
| Grade / UNS | Common Name | Industries | Typical Applications |
|---|---|---|---|
| C10100 | OFE Copper | Electronics, Electrical, Semiconductor | High-end electrical wiring, connectors, audio/video components, vacuum tubes |
| C10200 | OF Copper | Electrical, Electronics, Power Transmission | Busbars, electrical conductors, transformers, high-conductivity components |
| C11000 | ETP Copper | Electrical, Industrial, Construction | Electrical wiring, cables, busbars, heat exchangers, industrial machinery |
| C12200 | DHP Copper | Plumbing, HVAC, Industrial | Pipes, tubes, heat exchangers, roofing, condensers |
| C18150 | Chromium Copper | Welding, Industrial, Aerospace | Welding electrodes, high-strength components, corrosion-resistant fittings |
| C22000 | Commercial Bronze | Decorative, Bearings, Marine | Decorative sheets, bearings, bushings, architectural applications |
| C26000 | Cartridge Brass | Fittings, Electrical, Cartridge Manufacturing | Cartridge casings, fittings, precision components, valves |
| C36000 | Free Machining Brass | Precision Machining, Electrical, Industrial | Machined components, fasteners, electrical connectors, precision parts |
| C71500 | 70/30 Copper-Nickel | Marine, Chemical, Power | Seawater piping, heat exchangers, condensers, corrosion-resistant structures |
| C14500 / C14700 | Free Machining Copper | Electrical, Precision Machining | Connectors, fasteners, electrical components, small precision parts |
Packaging is a major part of every delivery, and we understand it very well. We supply many types of metals and other industrial metal products to make sure they reach our customers safely. We know products face many types of problems, such as vibration, moisture and rough handling therefore we follow a careful and organised packaging process. Our goal is simple: we deliver every product in the same strong and perfect condition as when it leaves our facility.
We check every order before packing it. The size, straightness, surface quality, grade, and quantity of each rod and bar are checked. We ensure that the material is correct as per the customer request. Once inspected, we sort the products by their size and grade of material. This will ensure that we maintain the order in everything and prevent errors in dispatch. Bundling and loading are also simpler and quicker.
After these steps, make sure to arrange the products in proper alignment so that they are straight and balanced. Then they are strapped down with industrial grade strapping. These straps keep the bundle secure during lifting and transportation. We include additional support to shorten bending or movement in longer rods. We also ensure that the straps do not tear the edges or the surface of the material. This cautious wrapping ensures the merchandise is secure throughout the delivery and transportation.
Sometimes metal can be damaged by moisture and changing weather conditions. We apply protective methods based on the shipment type and destination. We may use anti-rust coatings, moisture-resistant wrapping, or protective covers to prevent them. Our additional cover against humidity and corrosion is given to export shipments and coastal deliveries. These will assist us to retain the shine, surface finish and integrity of our metal products in the long-distance transportation.
In case of large orders and/or shipments to the export market, we offer extra protection. We pack them on heavy pallets or stuff them into tough wooden structures that can be transported all over the world. The packaging is dependent on the size and weight of the shipment. We ensure that the packing is able to withstand packing pressure and movement of containers. This strong outer coating secures the materials throughout their long trips, port services and storage in warehousing.
We have proper lifting equipment such as forklifts and cranes to load materials. Our team places the bundles carefully inside trucks or containers. We place them in such a manner that they do not roll or shift during the transportation. We balance the weight to minimise the weight on any section of the shipment. Our safe loading methods give us the chance to reduce the chances of being damaged in transit, whether it is along the road or the sea.
Ganga R Ispat Metals distributes its products in India and also in overseas markets. We provide transportation with trusted logistics vendors. In the case of domestic deliveries, we organise road transportation. In export orders, we meet the international shipping standards and container loading requirements. Each shipment will be planned based on the delivery schedules to make it arrive on time. Our well organized transport system assists us in delivering products in an efficient and safe way.
We make ready all papers preceding dispatch. These documents can be invoices, packing lists, and required certificates. Proper documentation assists in easy transportation and reduced time in clearance of customs when making export shipments. We have good records to promote transparency and professional service.
A well-structured packaging and transportation process directly impacts product performance upon delivery. Our approach ensures:
We believe that packaging is not just about wrapping materials — it is about protecting the value and reliability of the product until it reaches the client.
In Ganga R Ispat Metals, we suppose that safe packaging and transportation ensure the value of our products. To avoid bending, scratches, and corrosion, we make every effort to avoid transit damage. We consider packaging as our quality responsibility. We have a standard process; however, our packing techniques are changed according to the product size, order quantity, and destination.
We ensure that all the rods and bars are sold to our customers in a powerful, secure and working condition. We offer secure packaging or assured transportation as an additional service.
The purity level, conductivity requirement, thickness, and the type of application to be done to the product are some of the factors to be verified before choosing Copper Products. The appropriate copper grade will be selected to guarantee high service life and reliability.
Copper Products are offered in the form of rods, bars, plates, sheets, pipes, tubes, flats and ingots. These various forms help in machining, fabrication and mass industrial manufacturing.
Copper Products enhance the efficiency of the systems by minimising the loss of power, enhancing the flow of heat and their ability to perform over a long period. This will reduce the energy expenses and enhance equipment stability.
Copper Products are suitable for outdoor and wet conditions because they have natural corrosion resistance. Copper provides a protective layer on the surface that is useful in inhibiting dampness and air contact.
Yes, Copper Products are heat transferable. It is a good material since copper conducts heat. This is the reason why people use copper in heat exchangers, radiators, refrigeration systems and HVAC units.
The copper products find application in electrical works due to the ease of copper to facilitate the passage of electricity at a very low cost in terms of energy loss. This is best suited to wires, power distribution systems, cables and busbars.
