Bronze Bushes are plain bearings in cylindrical form manufactured using bronze alloys (primarily using copper and tin with added elements) which are intended to support rotating or sliding shafts with a minimum of friction and extended service life. They are appreciated because of their large carrying capacity, high wear, corrosion resistance, and good thermal conductivity; thus, they can be used in heavy-duty applications. Bronze bushes are used in various forms, such as standard sleeve bushes, axially held flanged bushes and also oil-impregnated/self-lubricating sintered bronze bushes, which minimise or eliminate the use of outside lubrication.
The typical materials are phosphor bronze and other alloys of high-strength bronze that provide durability even in adverse industrial settings. Common applications include industrial machinery, construction and earth-moving apparatus, automotive equipment, farm equipment, marine and more general engineering applications where a sliding or rotational movement is involved. Bronze bushes are economical solutions to reliable bearing solutions in a wide range of mechanical equipment and environments due to their good performance, wear and corrosion resistance and self-lubrication choices.
We, Ganga R Ispat Metals, are Bronze Bush Manufacturers in India, which provide engineered solutions in bearing applications where controlled friction, load endurance and service reliability are very important. We make Bronze Bushes of carefully balanced bronze alloys that are cast and centrifugally cast, machined, and finished by surface processes. A lot of each manufacturing is verified by chemical composition, hardness check, dimensional accuracy test and surface inspection in our in-house quality lab. We have used our Bronze Bushes to a great extent in pumps and valves, marine equipment, power transmission systems, industrial machinery, and heavy engineering installations, and wear resistance has a direct proportion to equipment life.
The Bronze Bushes in India are commonly used where there is a need for constant movement on a slider, and also where the loads may vary. Our products are plain bushes, flanged bushes, sleeve bushes and bespoke components of bushes created to suit specific conditions of operation. Precise microstructure and uniformity of alloy positioning enable our Bronze Bushes to ensure steady operation in press fitting, shaft rotation and serviceability in the long run. Our bushes are essential to the industries where the uneven wear, vibration or dimensional unsteadiness may cause equipment standstill.
We are Bronze Bushes Suppliers in India and thus offer a high degree of stability, specifications and timely delivery plans depending on the operations of the business. Every bush is checked on internal diameter, outer diameter, wall thickness and finish on the surface before being shipped. Our combined production control will allow us to achieve repeatable tolerances, predictable wear behaviour, and similar quality across batches of manufacturing.
|
Material Category |
Bush Type |
Process Control Method |
Typical Application |
|
Bronze alloys |
Plain bushes |
Centrifugal casting and machining. |
Shafts and rotating machinery. |
|
Bronze alloys |
Flanged bushes |
Dimensional stabilisation |
Pumps and motors |
|
Bronze alloys |
Sleeve bushes |
Boring and finishing. |
Power transmission systems |
|
Bronze alloys |
Custom bushes |
Drawing-based execution |
OEM and industrial machinery |
Our Bronze Bushes Dealers in India help customers inthe appropriate choice of buses depending on the condition of loads, speed of operation and exposure to the environment. Our dealers have regional stock, facilitate in-time deliveries, and assist the OEMs, maintenance teams and engineering units with the reliable availability of material.
This dealer system is highly organised to ensure continuity of supplies and long customer loyalty.
|
Standard Framework |
Evaluation Area |
Manufacturing Alignment |
|
IS Standards |
Material and dimensional parameters. |
Production: These were IS requirements stipulated by customers. |
|
ASTM Standards |
Wear resistance and performance. |
Production capacity according to ASTM standards. |
|
Customer Drawings |
Fitment and tolerance control. |
Implementation of approved drawings. |
|
Export Compliance |
Tracking and record keeping. |
Inspection-supported reporting |
Ganga R Ispat Metals, as Bronze Bushes Exporters in India, is able to provide high-quality bush parts to its customers in other countries under stringent quality and product documentation procedures. Export consignments are made ready with tested certificates, secure packaging and full traceability to the global engineering and marine standards. Overseas industries rely on our Bronze Bushes when they have applications where the performance of wear and dimensional stability are required.
In case of your application demand on wear resistance, proper fitment and stability in long term working, Ganga R Ispat Metals is prepared to serve you. Being Bronze Bushes Manufacturers, Suppliers, Dealers and Exporters, we provide engineered Bronze Bush solutions in disciplined process control, technical validation and sound supply planning. We can be contacted to negotiate specifications, design custom bushes, and performance-oriented Bronze Bushes to use in industry.
| Grade / Alloy | Density (g/cm³) | Melting Point (°C) | Specific Gravity | Notes / Applications |
|---|---|---|---|---|
| C90700 (Phosphor Bronze) | 8.8 | 900–950 | 8.8 | Electrical connectors, light-duty bushings, moderate-load applications |
| C51000 (Phosphor Bronze) | 8.8 | 900–950 | 8.8 | Bearings, bushings, electrical components |
| C83600 (Tin Bronze, Leaded) | 8.8 | 900–940 | 8.8 | Industrial machinery, heavy-duty bushings, wear-resistant components |
| C93700 (Tin Bronze, High Strength) | 8.8 | 900–940 | 8.8 | High-load industrial bushings, wear plates |
| C93200 (Aluminium Bronze) | 7.8 | 1020–1060 | 7.8 | Marine bushings, pump shafts, high-strength industrial applications |
| C95400 (Nickel Aluminium Bronze) | 7.8 | 1020–1060 | 7.8 | Offshore, marine, heavy-duty industrial bushings |
| C95500 (Leaded Nickel Aluminium Bronze) | 7.8 | 1020–1060 | 7.8 | Machinable high-performance bushings |
| SAE 660 / SAE 63 Bronze | 8.8 | 900–940 | 8.8 | Automotive and industrial machinery bushings |
| Grade / Alloy | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Brinell Hardness (HB) | Notes / Applications |
|---|---|---|---|---|---|
| C90700 (Phosphor Bronze) | 450–550 | 250–300 | 10–15 | 120–160 | Electrical connectors, light-duty bushings, moderate-load applications |
| C51000 (Phosphor Bronze) | 400–500 | 230–280 | 10–15 | 110–150 | Bearings, bushings, electrical components |
| C83600 (Tin Bronze, Leaded) | 350–500 | 200–300 | 8–12 | 100–150 | Industrial machinery, heavy-duty bushings, wear-resistant components |
| C93700 (Tin Bronze, High Strength) | 400–550 | 250–350 | 8–12 | 120–160 | High-load industrial bushings, gears, wear plates |
| C93200 (Aluminium Bronze) | 550–700 | 350–500 | 5–10 | 180–240 | Marine bushings, pump shafts, high-strength industrial applications |
| C95400 (Nickel Aluminium Bronze) | 600–750 | 400–500 | 5–10 | 200–260 | Offshore, marine, heavy-duty industrial bushings |
| C95500 (Leaded Nickel Aluminium Bronze) | 500–650 | 350–450 | 6–10 | 180–240 | Machinable high-performance bushings |
| SAE 660 / SAE 63 Bronze | 350–500 | 200–300 | 8–12 | 100–150 | Automotive and industrial machinery bushings |
| Grade / Alloy | Thermal Conductivity (W/m·K) | Coefficient of Thermal Expansion (10⁻⁶ /°C) | Specific Heat (J/g·°C) | Max Operating Temperature (°C) | Notes / Applications |
|---|---|---|---|---|---|
| C90700 (Phosphor Bronze) | 60–65 | 17–18 | 0.38 | 250 | Electrical connectors, light-duty bushings, moderate-load applications |
| C51000 (Phosphor Bronze) | 60–65 | 17–18 | 0.38 | 250 | Bearings, bushings, electrical components |
| C83600 (Tin Bronze, Leaded) | 55–60 | 18–19 | 0.38 | 300 | Industrial machinery, heavy-duty bushings, wear-resistant components |
| C93700 (Tin Bronze, High Strength) | 55–60 | 18–19 | 0.38 | 300 | High-load industrial bushings, wear plates |
| C93200 (Aluminium Bronze) | 40–45 | 19–20 | 0.38 | 400 | Marine bushings, pump shafts, high-strength industrial applications |
| C95400 (Nickel Aluminium Bronze) | 38–42 | 19–20 | 0.38 | 400 | Offshore, marine, heavy-duty industrial bushings |
| C95500 (Leaded Nickel Aluminium Bronze) | 38–42 | 19–20 | 0.38 | 400 | Machinable high-performance bushings |
| SAE 660 / SAE 63 Bronze | 55–60 | 18–19 | 0.38 | 300 | Automotive and industrial machinery bushings |
| Standard / Specification | Grade / Alloy | Chemical Composition (% approx.) | Notes / Applications |
|---|---|---|---|
| ASTM B505 / B505M | C90700 (Phosphor Bronze) | Cu 90–94, Sn 5–10, P 0.03–0.35 | Electrical contacts, light machinery bushings, connectors |
| ASTM B505 / B505M | C51000 (Phosphor Bronze) | Cu 90–92, Sn 6–8, P 0.03–0.35 | Bearings, light-duty bushings, electrical components |
| ASTM B505 / B505M | C83600 (Tin Bronze, Leaded) | Cu 88–91, Sn 8–10, Pb 0.3–1 | Industrial bearings, heavy machinery bushings, wear-resistant components |
| ASTM B505 / B505M | C93700 (Tin Bronze, High Strength) | Cu 85–88, Sn 9–11, Pb 0.1–0.5 | High-load industrial bushings, wear plates |
| ISO 4379 / ISO 3547 | C93200 (Aluminium Bronze) | Cu 78–82, Al 8–10, Ni 5–7, Fe 1–3 | Marine bushes, pump shafts, high-strength industrial applications |
| ISO 4379 / ISO 3547 | C95400 (Nickel Aluminium Bronze) | Cu 79–81, Al 7–10, Ni 4–5, Fe 1–3 | Offshore, marine, heavy-duty industrial bushes |
| ISO 4379 / ISO 3547 | C95500 (Leaded Nickel Aluminium Bronze) | Cu 79–81, Al 7–10, Ni 4–5, Pb 0.8–1.5 | Machinable, high-performance industrial bearings and bushings |
| DIN 429 / DIN 1494 | C93200 / C95400 | Same as above | German standard for plain bushes and sleeves; marine & industrial |
| BS 187 / BS EN 12163 | C90700 / C51000 / C93200 | Same as above | British / European standard for industrial bronze bushes |
| JIS H 5202 / JIS B 1351 | C90700 / C51000 / C93200 | Same as above | Japanese Industrial Standard for bushes; automotive & machinery |
| SAE 660 / SAE 63 Bronze | C90700 / C51000 / C83600 | Same as above | Automotive & heavy-duty industrial applications |
| Grade / Alloy | Outer Diameter (OD, mm) | Inner Diameter (ID, mm) | Wall Thickness (mm) | Length / Height (mm) | Notes / Applications |
|---|---|---|---|---|---|
| C90700 / C51000 (Phosphor Bronze) | 10–50 | 5–45 | 2–5 | 10–50 | Light-duty bushings, electrical connectors |
| C90700 / C51000 (Phosphor Bronze) | 51–100 | 46–95 | 5–10 | 51–100 | Light-duty bushings, electrical connectors |
| C90700 / C51000 (Phosphor Bronze) | 101–200 | 96–180 | 10–20 | 101–150 | Light-duty bushings, electrical connectors |
| C83600 / C93700 (Tin Bronze) | 15–75 | 10–70 | 3–10 | 20–75 | Heavy-duty industrial bushings, wear-resistant applications |
| C83600 / C93700 (Tin Bronze) | 76–150 | 71–145 | 10–15 | 76–150 | Heavy-duty industrial bushings, wear-resistant applications |
| C83600 / C93700 (Tin Bronze) | 151–300 | 146–280 | 15–25 | 151–200 | Heavy-duty industrial bushings, wear-resistant applications |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | 20–100 | 15–95 | 5–15 | 30–100 | Marine/offshore bushings, high-strength industrial applications |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | 101–200 | 96–190 | 15–25 | 101–200 | Marine/offshore bushings, high-strength industrial applications |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | 201–400 | 191–380 | 25–40 | 201–300 | Marine/offshore bushings, high-strength industrial applications |
| SAE 660 / SAE 63 Bronze | 15–75 | 10–70 | 3–10 | 20–75 | Automotive and industrial machinery bushings |
| SAE 660 / SAE 63 Bronze | 76–150 | 71–145 | 10–15 | 76–150 | Automotive and industrial machinery bushings |
| SAE 660 / SAE 63 Bronze | 151–250 | 146–230 | 15–25 | 151–200 | Automotive and industrial machinery bushings |
| Grade / Alloy | Outer Diameter (OD, mm) | Inner Diameter (ID, mm) | Wall Thickness (mm) | Length / Height (mm) | Approx. Weight (kg) | Notes / Applications |
|---|---|---|---|---|---|---|
| C90700 / C51000 (Phosphor Bronze) | 10–50 | 5–45 | 2–5 | 10–50 | 0.05–1.2 | Light-duty bushings, electrical connectors |
| C90700 / C51000 (Phosphor Bronze) | 51–100 | 46–95 | 5–10 | 51–100 | 1.3–6.5 | Light-duty bushings, electrical connectors |
| C90700 / C51000 (Phosphor Bronze) | 101–200 | 96–180 | 10–20 | 101–150 | 6.6–25 | Light-duty bushings, electrical connectors |
| C83600 / C93700 (Tin Bronze) | 15–75 | 10–70 | 3–10 | 20–75 | 0.15–5 | Heavy-duty industrial bushings, wear-resistant applications |
| C83600 / C93700 (Tin Bronze) | 76–150 | 71–145 | 10–15 | 76–150 | 5.1–20 | Heavy-duty industrial bushings, wear-resistant applications |
| C83600 / C93700 (Tin Bronze) | 151–300 | 146–280 | 15–25 | 151–200 | 20–60 | Heavy-duty industrial bushings, wear-resistant applications |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | 20–100 | 15–95 | 5–15 | 30–100 | 0.5–10 | Marine/offshore bushings, high-strength industrial applications |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | 101–200 | 96–190 | 15–25 | 101–200 | 10–40 | Marine/offshore bushings, high-strength industrial applications |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | 201–400 | 191–380 | 25–40 | 201–300 | 40–120 | Marine/offshore bushings, high-strength industrial applications |
| SAE 660 / SAE 63 Bronze | 15–75 | 10–70 | 3–10 | 20–75 | 0.2–4 | Automotive and industrial machinery bushings |
| SAE 660 / SAE 63 Bronze | 76–150 | 71–145 | 10–15 | 76–150 | 4.1–15 | Automotive and industrial machinery bushings |
| SAE 660 / SAE 63 Bronze | 151–250 | 146–230 | 15–25 | 151–200 | 15–45 | Automotive and industrial machinery bushings |
| Grade / Alloy | Cu (%) | Sn (%) | Al (%) | Ni (%) | P (%) | Pb (%) | Fe (%) | Other (%) | Notes / Applications |
|---|---|---|---|---|---|---|---|---|---|
| C90700 (Phosphor Bronze) | 90–94 | 5–10 | – | – | 0.03–0.35 | – | – | – | Electrical contacts, light machinery bushings, moderate-load applications |
| C51000 (Phosphor Bronze) | 90–92 | 6–8 | – | – | 0.03–0.35 | – | – | – | Bearings, bushings, electrical components |
| C83600 (Tin Bronze, Leaded) | 88–91 | 8–10 | – | – | – | 0.3–1 | – | – | Heavy machinery, industrial bushings, wear-resistant applications |
| C93700 (Tin Bronze, High Strength) | 85–88 | 9–11 | – | – | – | 0.1–0.5 | – | – | High-load industrial bushings, wear plates |
| C93200 (Aluminium Bronze) | 78–82 | – | 8–10 | 5–7 | – | – | 1–3 | – | Marine bushings, pump shafts, high-strength industrial applications |
| C95400 (Nickel Aluminium Bronze) | 79–81 | – | 7–10 | 4–5 | – | – | 1–3 | – | Offshore, marine, heavy-duty industrial bushings |
| C95500 (Leaded Nickel Aluminium Bronze) | 79–81 | – | 7–10 | 4–5 | – | 0.8–1.5 | 1–3 | – | Machinable, high-performance industrial bushings |
| SAE 660 / SAE 63 Bronze | 88–92 | 8–10 | – | – | – | – | – | – | Automotive & industrial machinery bushings |
| Grade / Alloy | Primary Process | Step | Description | Notes / Applications |
|---|---|---|---|---|
| C90700 / C51000 (Phosphor Bronze) | Casting → Machining → Heat Treatment → Finishing | 1. Melting | Cu, Sn, P alloys melted in furnace | Light-duty bushings, electrical components, bearings |
| 2. Casting | Sand or centrifugal casting into rough bush shapes | |||
| 3. Machining | Turning, boring to precise dimensions | |||
| 4. Heat Treatment | Stress relief or annealing | |||
| 5. Finishing | Grinding, polishing, coating | |||
| C83600 / C93700 (Tin Bronze) | Casting / Forging → Machining → Heat Treatment → Finishing | 1. Melting | Cu + Sn ± Pb melted in furnace | Heavy-duty bushings, wear-resistant applications |
| 2. Casting | Sand, centrifugal, or gravity casting | |||
| 3. Forging (optional) | Hot forging for high-load bushings | |||
| 4. Machining | Turning, boring to final dimensions | |||
| 5. Heat Treatment | Stress relief | |||
| 6. Finishing | Grinding, polishing, coating | |||
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | Casting → Hot Forging → Machining → Heat Treatment → Finishing | 1. Melting | Cu + Al + Ni ± Fe melted in high-temp furnace | Marine/offshore, high-strength industrial bushings |
| 2. Casting | Sand or investment casting | |||
| 3. Hot Forging | 900–1050°C for density and strength | |||
| 4. Machining | Carbide tools for precise dimensions | |||
| 5. Heat Treatment | Solution treatment or stress relief | |||
| 6. Finishing | Grinding, polishing, corrosion protection coating | |||
| SAE 660 / SAE 63 Bronze | Casting / Rolling → Machining → Heat Treatment → Finishing | 1. Melting | Cu + Sn alloys melted in furnace | Automotive and industrial machinery bushings |
| 2. Casting / Rolling | Rods or billets produced | |||
| 3. Machining | Turning, boring, milling | |||
| 4. Heat Treatment | Annealing or stress relief | |||
| 5. Finishing | Grinding, polishing, optional coating |
| Grade / Alloy | Step | Description | Purpose / Notes |
|---|---|---|---|
| C90700 / C51000 (Phosphor Bronze) | 1. Grinding | Surface grinding to achieve precise dimensions | Ensures tight tolerance and smooth surface for electrical or mechanical fit |
| 2. Polishing | Mechanical polishing with abrasive compounds | Improve surface finish and appearance | |
| 3. Coating (Optional) | Thin protective coating (oil or lacquer) | Prevents oxidation and corrosion during storage or light-duty use | |
| C83600 / C93700 (Tin Bronze) | 1. Grinding | Surface grinding to exact dimensions | Ensures precision for heavy-duty bushings |
| 2. Polishing | Abrasive polishing | Reduces friction and improves wear performance | |
| 3. Coating (Optional) | Oil, lacquer, or anti-corrosion treatment | Extends life in industrial environments | |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | 1. Grinding | Precision grinding using carbide tools | Achieve high dimensional accuracy and tight tolerances |
| 2. Polishing | Mechanical or buff polishing | Reduces surface roughness and friction | |
| 3. Coating / Passivation | Anti-corrosion coating or chemical passivation | Protects from marine and offshore corrosion | |
| SAE 660 / SAE 63 Bronze | 1. Grinding | Surface grinding to required dimensions | Maintain proper fit in automotive and industrial applications |
| 2. Polishing | Mechanical polishing | Smooth surface and reduce friction | |
| 3. Coating (Optional) | Protective oil or anti-corrosion coating | Protects during storage and transport |
| Grade / Alloy | Industry | Typical Applications | Notes / Advantages |
|---|---|---|---|
| C90700 / C51000 (Phosphor Bronze) | Electrical | Bushings in motors, connectors, switches | Excellent conductivity, low wear, corrosion-resistant |
| Automotive | Small bearings, control linkages | High fatigue resistance, light load applications | |
| Machinery | Light-duty machinery bushings | Smooth operation, minimal friction | |
| C83600 / C93700 (Tin Bronze) | Industrial Machinery | Heavy-duty bearings, gear bushings | High wear resistance, excellent load capacity |
| Construction | Pumps, valves, industrial rollers | Strong and durable in high-load applications | |
| Marine | Propeller shaft bearings (light-duty) | Corrosion resistant in moderate marine conditions | |
| C93200 / C95400 / C95500 (Aluminium / Nickel Aluminium Bronze) | Marine / Offshore | Ship propeller bearings, rudder bushings | Excellent corrosion resistance, high strength for seawater |
| Industrial | High-load pumps, compressors, turbines | Can withstand heavy loads and harsh environments | |
| Oil & Gas | Offshore platforms, drilling equipment | Resistant to corrosion, erosion, and high load | |
| SAE 660 / SAE 63 Bronze | Automotive | Engine components, bushings, steering linkages | Moderate strength, wear-resistant, good machinability |
| Machinery | Industrial bushings, rollers | Reliable performance under moderate loads | |
| Electrical | Switchgear bushings, connectors | Good conductivity and dimensional stability |
Packaging is a major part of every delivery, and we understand it very well. We supply many types of metals and other industrial metal products to make sure they reach our customers safely. We know products face many types of problems, such as vibration, moisture and rough handling therefore we follow a careful and organised packaging process. Our goal is simple: we deliver every product in the same strong and perfect condition as when it leaves our facility.
We check every order before packing it. The size, straightness, surface quality, grade, and quantity of each rod and bar are checked. We ensure that the material is correct as per the customer request. Once inspected, we sort the products by their size and grade of material. This will ensure that we maintain the order in everything and prevent errors in dispatch. Bundling and loading are also simpler and quicker.
After these steps, make sure to arrange the products in proper alignment so that they are straight and balanced. Then they are strapped down with industrial grade strapping. These straps keep the bundle secure during lifting and transportation. We include additional support to shorten bending or movement in longer rods. We also ensure that the straps do not tear the edges or the surface of the material. This cautious wrapping ensures the merchandise is secure throughout the delivery and transportation.
Sometimes metal can be damaged by moisture and changing weather conditions. We apply protective methods based on the shipment type and destination. We may use anti-rust coatings, moisture-resistant wrapping, or protective covers to prevent them. Our additional cover against humidity and corrosion is given to export shipments and coastal deliveries. These will assist us to retain the shine, surface finish and integrity of our metal products in the long-distance transportation.
In case of large orders and/or shipments to the export market, we offer extra protection. We pack them on heavy pallets or stuff them into tough wooden structures that can be transported all over the world. The packaging is dependent on the size and weight of the shipment. We ensure that the packing is able to withstand packing pressure and movement of containers. This strong outer coating secures the materials throughout their long trips, port services and storage in warehousing.
We have proper lifting equipment such as forklifts and cranes to load materials. Our team places the bundles carefully inside trucks or containers. We place them in such a manner that they do not roll or shift during the transportation. We balance the weight to minimise the weight on any section of the shipment. Our safe loading methods give us the chance to reduce the chances of being damaged in transit, whether it is along the road or the sea.
Ganga R Ispat Metals distributes its products in India and also in overseas markets. We provide transportation with trusted logistics vendors. In the case of domestic deliveries, we organise road transportation. In export orders, we meet the international shipping standards and container loading requirements. Each shipment will be planned based on the delivery schedules to make it arrive on time. Our well organized transport system assists us in delivering products in an efficient and safe way.
We make ready all papers preceding dispatch. These documents can be invoices, packing lists, and required certificates. Proper documentation assists in easy transportation and reduced time in clearance of customs when making export shipments. We have good records to promote transparency and professional service.
A well-structured packaging and transportation process directly impacts product performance upon delivery. Our approach ensures:
We believe that packaging is not just about wrapping materials — it is about protecting the value and reliability of the product until it reaches the client.
In Ganga R Ispat Metals, we suppose that safe packaging and transportation ensure the value of our products. To avoid bending, scratches, and corrosion, we make every effort to avoid transit damage. We consider packaging as our quality responsibility. We have a standard process; however, our packing techniques are changed according to the product size, order quantity, and destination.
We ensure that all the rods and bars are sold to our customers in a powerful, secure and working condition. We offer secure packaging or assured transportation as an additional service.
Yes, due to their heat and corrosion resistance, they can be used in extreme industrial conditions.
Yes, bronze bushes can be custom made to meet specific machinery or operational needs with a inner and outer diameter and length.
In applications where smooth rotation and low wear is needed, bronze bushes can be used as they provide low friction.
Because bronze bushes have excellent compression strength, service life and resistance to wear in continual operations, they are ideal and high-load operations.
Yes, in order for bronze bushes to have positive fits and repeatable performance in operation and installation, they have to be accurately machined.
